How Much Do Lever Door Handles and Easy-Use Faucets Cost in 2026?
Swapping knobs for levers costs about $100 to $350 per door installed, and a single-lever or touchless faucet runs $200 to $680 installed.
Quick answer
$100 to $350
Full range we found: $75 to $680.
Programs that often help: Area Agencies on Aging: Home Repair and Modification Help, Nonprofit Home Repair Programs for Older Adults (Rebuilding Together, Habitat and More), State Assistive Technology Programs: Try, Borrow, Reuse and Finance Equipment, Centers for Independent Living: Disability-Led Help to Stay Home, Medicaid Waivers That Pay for Home Modifications, Deducting Home Modifications as a Medical Expense (IRS Publication 502)
Round doorknobs and twist faucets are hard to use with arthritis, a weak grip or a stroke. Levers fix that. You can push a lever with a closed fist, a palm or even an elbow. This is one of the cheapest changes you can make, and it helps everyone in the house.
Cost at a glance
| Item | Typical cost | Source |
|---|---|---|
| Lever door set (hardware) | Under $100 for most | Angi 1 |
| Pro install of door hardware, per door | $140 – $350 | Angi 1 |
| Doorknob replacement, installed | $100 – $250 (avg. $150) | HomeGuide 2 |
| Kitchen knobs to levers | $150 – $350 | Fixr 3 |
| Kitchen faucet, installed | $250 – $600 | HomeGuide 4 |
| Bathroom faucet, installed | $230 – $680 | HomeGuide 4 |
| Touchless faucet (part only) | $150 – $600 | HomeGuide 4 |
Lever door handles
Angi says most door levers cost less than $100 and are easy to install yourself 1. It lists professional installation of door knobs at $140 to $350 per door, and installing a lever is the same kind of job 1. HomeGuide puts doorknob replacement at $100 to $250, with a national average of $150, a low of $75 and a high of $400 2. In HomeGuide's numbers, labor is about half the bill 2.
A standard swap into existing holes takes about 30 minutes 2. Doing every door in one visit cuts the cost per door, since many pros charge a minimum visit fee.
Which type to buy
- Passage levers have no lock. Use them for halls and closets. They are the cheapest 2.
- Privacy levers lock with a push button. Use them for bathrooms and bedrooms. Pick one that unlocks from outside with a simple tool, so a helper can get in during an emergency.
- Keyed levers are for exterior doors. Consider a keypad lever so no one has to work a small key.
Easy-use faucets
A single-lever faucet lets you set water flow and heat with one motion. A pull-down sprayer helps fill pots without lifting them. A touchless faucet turns on with a wave.
HomeGuide lists faucet prices before installation 4:
- Single-handle: $40 to $500
- Pull-down: $80 to $700
- Touchless: $150 to $600
- Bathroom sink faucets: $70 to $250
Installed totals run about $250 to $600 in the kitchen and $230 to $680 in the bathroom 4. Labor alone averages about $185 4.
Safety tip: hot water
Easier faucets make it easier to get hot water fast. If the person has reduced feeling in their hands, ask the plumber about an anti-scald valve or lowering the water heater setting. Fixr lists anti-scald controls at $80 to $300 3.
DIY or hire a pro?
Levers: Usually DIY. Take the old knob to the store, or measure the backset and door thickness, to make sure the new lever fits the existing holes.
Faucets: HomeGuide says a straight swap is DIY-friendly, but upgrades that need new holes or more plumbing usually need a pro 4. Old, stuck shutoff valves are a common reason to call a plumber.
No permit is needed for lever swaps. A simple faucet swap normally does not need one either. Check local rules if valves or supply lines are changed.
Who can help pay
- Area Agencies on Aging and nonprofit repair groups often swap knobs for levers during home safety visits.
- State assistive technology programs and Centers for Independent Living can suggest products and sometimes provide them.
- Medicaid waivers may cover small home changes as part of a home care plan.
- Tax deduction: The IRS lists modified door hardware and modified fixtures among disability changes that can count as medical expenses 5.
Bottom line
Lever handles cost under $100 each and take minutes to install, so do every door that matters. Pair them with a single-lever faucet in the kitchen and bathroom for one of the best-value safety upgrades in the home.
Common questions
Why are lever handles better than knobs?
Knobs need a strong grip and a wrist twist. Levers can be pushed down with a fist, palm or elbow, which helps people with arthritis, weak hands or full hands.
How much does it cost to replace a doorknob with a lever?
Angi says most levers cost under $100 and can be installed yourself. HomeGuide lists professional doorknob replacement at $100 to $250, with an average of $150.
Are touchless faucets worth it?
They can help people with very weak hands or memory issues. HomeGuide lists touchless faucets at $150 to $600 before installation.
Can I deduct lever handles on my taxes?
The IRS lists modified door hardware among disability home changes that can count as medical expenses, subject to the 7.5 percent of income floor.
Sources
- Door Knobs vs. Door Levers: Key Differences — Angi. Checked October 18, 2026.
- How Much Does Door Knob Replacement Cost? (2026) — HomeGuide. Checked October 18, 2026.
- Cost of Aging in Place — Fixr. Checked October 18, 2026.
- How Much Does It Cost to Install or Replace a Faucet? (2026) — HomeGuide. Checked October 18, 2026.
- Publication 502 (2025), Medical and Dental Expenses — Internal Revenue Service. Checked October 18, 2026.