Aging in Place Grants

How Much Does Non-Slip Flooring Cost in 2026?

Updated October 18, 2026 · By the Aging in Place Grants research desk · How we research

Slip-resistant flooring usually costs $3 to $22 per square foot installed, with sheet vinyl at the low end and porcelain tile at the high end.

Quick answer

$3 to $22 typical, per square foot

Full range we found: $2 to $50.

Programs that often help: Area Agencies on Aging: Home Repair and Modification Help, Nonprofit Home Repair Programs for Older Adults (Rebuilding Together, Habitat and More), Medicaid Waivers That Pay for Home Modifications, USDA Section 504 Home Repair Loans and Grants, CDBG Home Repair and Accessibility Programs (Community Development Block Grants), State Housing Finance Agency Repair and Accessibility Programs, Deducting Home Modifications as a Medical Expense (IRS Publication 502)

Slick floors cause many falls, especially in bathrooms and kitchens where floors get wet. Replacing glossy tile or worn vinyl with a slip-resistant surface can make a big difference. It also gives you a chance to remove raised thresholds and loose rugs.

Non-slip flooring cost at a glance

  • Angi lists nonslip flooring at $3 to $22 per square foot 1.
  • Fixr lists anti-skid bathroom tile at $4,500 to $8,000 per bathroom and non-slip kitchen flooring at $6,400 to $11,000 2.
  • HomeGuide prices bathroom floors by material, from $2 per square foot for sheet vinyl to $50 for porcelain tile 3.

Fixr's project totals seem high for a small bathroom and likely include tear-out, subfloor work and larger rooms. Use the per-foot numbers to check any quote.

Material Installed cost per sq ft Source
Sheet vinyl $2 – $7 HomeGuide 3
Luxury vinyl plank (LVP) $4 – $16 HomeGuide 3
Ceramic tile $12 – $40 HomeGuide 3
Porcelain tile $15 – $50 HomeGuide 3
Nonslip flooring, general $3 – $22 Angi 1

For a 40-square-foot bathroom floor, that works out to roughly $80 to $280 in sheet vinyl or $160 to $640 in LVP before tear-out and repairs, using HomeGuide's ranges 3.

Choosing a floor that grips

Vinyl and luxury vinyl plank

Vinyl resists water and feels softer and warmer underfoot than tile. Many products have a textured surface. It is often the best value for aging in place.

Tile

Tile lasts a long time, but glossy tile gets slick when wet. Matte or textured tile, and small mosaic tile with more grout lines, give better grip. HomeGuide notes that textured finishes help prevent slips in small bathrooms 3. Ask the store for the tile's wet slip rating.

Epoxy and other coatings

HomeGuide warns epoxy can be slippery unless an anti-slip additive is used 3. The same goes for polished concrete.

Floors to avoid

Deep-pile carpet can catch walker feet and wheelchair wheels. Loose throw rugs are a top trip hazard.

Hidden costs

  • Tear-out. Removing old tile is slow, messy work.
  • Subfloor repair. Old bathrooms often have soft spots near the toilet or tub.
  • Thresholds. Matching floor heights between rooms removes trip edges. Ask your installer to plan flat transitions.
  • Moving the toilet. Bathroom floors usually require pulling the toilet and resetting it.

Low-cost fixes

Before buying new floors, try the cheap stuff:

  • Remove throw rugs. Fixr lists throw rug removal as an aging-in-place task at $150 to $250 2.
  • Add a bedside safety mat. Fixr lists $80 to $200 2.
  • Put non-slip strips or a mat in the tub or shower.
  • Use rug tape or rug pads for rugs you keep.
  • Wipe up spills right away and use non-slip shoes at home.

DIY or hire a pro?

Click-lock vinyl plank is a popular DIY floor in dry rooms. In bathrooms, water resistance at the edges matters, so many people hire a pro. Tile work is labor-heavy and best left to a skilled installer. A permit is not usually needed for flooring alone, but check if the subfloor or plumbing is changed.

Who can help pay

  • Area Agencies on Aging and nonprofit repair groups often fix trip hazards and slippery floors for low-income seniors.
  • Medicaid waivers may cover floor changes that support safety at home.
  • USDA Section 504 grants can fix health and safety hazards for very-low-income rural owners 62 and older 4.
  • City CDBG and state housing finance agency repair programs may help eligible owners.
  • Tax deduction: Flooring changes made for a medical reason may count only if they do not add home value, and only the medical part counts. Ask a tax pro.

Bottom line

Budget about $3 to $22 per square foot for slip-resistant flooring, with vinyl at the low end. Fix rugs and tub mats first, then replace the bathroom floor if it is slick when wet.

Common questions

What is the most slip-resistant flooring?

Textured vinyl, matte or textured tile, and small mosaic tile with many grout lines give more grip than glossy tile. Ask for a product's wet slip rating before you buy.

How much does it cost to put non-slip flooring in a bathroom?

Fixr lists anti-skid bathroom tile at $4,500 to $8,000 for a project. Per square foot, Angi lists nonslip flooring at $3 to $22.

Is luxury vinyl plank good for seniors?

Many families choose it because it is water-resistant, softer and warmer than tile, and less slippery than glossy surfaces. HomeGuide lists LVP at $4 to $16 per square foot installed.

Are there cheaper fixes than new floors?

Yes. Removing throw rugs, adding non-slip strips in the tub, and taping down rug edges cost little. Fixr lists throw rug removal at $150 to $250 and a bedside safety mat at $80 to $200.

Sources

  1. Cost of Making a Home Wheelchair Accessible in 2026 — Angi. Checked October 18, 2026.
  2. Cost of Aging in Place — Fixr. Checked October 18, 2026.
  3. The Best Flooring for Bathrooms (2026) — HomeGuide. Checked October 18, 2026.
  4. Single Family Housing Repair Loans & Grants — USDA Rural Development. Checked October 18, 2026.